Principal Designer
for Building Regulations
Complying with the intricacies of the Building Safety Act 2022 involves specialist knowledge. We intervene on your behalf to handle your project's compliance from inception through completion, with each phase within the design and building work complying with current building legislation. We safeguard your project and give you the security you deserve.
When is a Building Regulations Principal Designer needed?
Since the introduction of the Building Safety Act 2022, the role of the Building Regulations principal designer has become a legal requirement for all construction projects where building regulations apply. This applies whether the project involves more than one contractor or not. As the building owner, you have a duty to appoint a competent Building Regulations Principal Designer to plan, manage, and monitor the design work during the pre-construction phase.
The Principal Designer role is crucial for ensuring that designers produce designs that comply with all relevant building regulations and standards. This is especially critical for higher-risk buildings (HRBs), where the regulatory framework is even more stringent. Our role is to ensure that health and safety, as well as building safety, are embedded in the project from the outset, establishing the Golden Thread of Information and managing design compliance until the construction phase begins and the principal contractor takes over.
Gateway Process
Under the Building Safety Act 2022, projects must go through the Gateway Process, which ensures compliance at key stages before construction progresses:
-
Confirms that safety and compliance considerations are included at the planning stage.
-
Verifies that the design meets all regulatory requirements before construction begins.
-
Ensures that construction has been completed in line with the approved designs and regulatory obligations.
The Gateway Process ensures that projects meet legal requirements at every stage, particularly for higher-risk buildings.
Awards
& Recognitions
Compliance Declarations
As part of our Principal Designer role, we manage Compliance Declarations, which are formal statements confirming that your designs and construction plans meet all relevant building regulations and safety requirements.
These declarations:
Formally certify that design and construction work complies with regulatory standards.
Provide a clear, auditable record for regulators, building owners, and other stakeholders.
Are submitted at key stages, including the Gateway Process, ensuring that each phase of the project is compliant before progressing.
By overseeing Compliance Declarations, we help safeguard your project against regulatory risk, reduce delays, and provide confidence that all legal obligations are being met.
The Golden Thread of Information
The Golden Thread is a central part of the Building Safety Act 2022, requiring accurate, up-to-date records of design, construction, and safety information to be maintained throughout the lifecycle of the building.
As Principal Designer, we establish and maintain this thread by:
Capturing key safety and compliance information digitally.
Ensuring all design changes, risk assessments, and compliance checks are recorded.
Providing accessible information for building owners, regulators, and maintenance teams.
This creates a transparent, auditable record that supports long-term building safety and regulatory compliance.
Our Principal Designer Services
We provide hands-on, expert guidance throughout the pre-construction phase, ensuring that all design elements comply with the new regulatory regime.
Expert Guidance & Compliance Management
Our experienced team offers expert guidance to ensure your design and building work meets all relevant requirements. We manage the coordination between multiple designers and the design team, ensuring that the design work the principal contractor receives is compliant and safe.
Risk Mitigation & Safety Focus
We have the necessary competence, including the knowledge, experience, and behaviours, to fulfil the Principal Designer duties effectively, ensuring your project meets both CDM and Building Regulations.
Regulatory Competence & Project Delivery
Our team possesses the organisational capability and has undergone formal training to navigate the secondary legislation of the Building Safety Act.
Why choose Anderton Gables?
At Anderton Gables, we understand the key differences between the old regime and the new regulatory regime introduced by the Building Safety Act. Our team combines expertise in surveying, project management, and architecture to offer practical, insightful advice.
Regulatory Adherence: We ensure all legal duties are met, from the pre-construction phase through to handover to the principal contractor.
Sector-Wide Expertise: We have successfully managed the PD role across industrial, residential, retail, and demolition projects, including both commercial and domestic projects.
Integrated Support: We act as an extension of your team, ensuring the lead designer and other designers work cohesively to ensure compliance.
FAQS
-
The Principal Designer's duties include planning, managing, and monitoring all design work during the pre-construction phase to ensure the work complies with building regulations. This involves coordinating with the design team.
-
The Building Safety Act 2022 created this formal role, giving the Building Regulations Principal Designer overall responsibility for design compliance. This introduced additional duties compared to the CDM Principal Designer role, particularly for higher-risk buildings, and established stringent competency requirements.
-
While they share the same name in some contexts, the roles are distinct. The CDM Principal Designer focuses on health and safety risks during construction. The Building Regulations Principal Designer focuses on ensuring that the design work itself complies with the technical requirements of the Building Regulations, a critical part of the regulatory reform for building safety.
-
We take reasonable steps to check the competence of any designers we appoint or work with. This includes verifying their relevant experience, qualifications, and understanding of the legislative framework. We ensure the entire design team has the right organisational capability for the project.
-
The Golden Thread is a digital record of all design, construction, and compliance information maintained throughout the building’s lifecycle, ensuring safety, transparency, and accountability.
-
The Gateway Process consists of three key regulatory checkpoints, planning, pre-construction, and completion, designed to ensure compliance with building safety regulations before construction progresses.
-
Compliance Declarations are formal statements that certify design and construction work meets all regulatory and safety requirements. They are submitted at key stages and provide an auditable record for all stakeholders.
Like what you see? Let’s talk
Discover Principal Designer for Building Regulations with Anderton Gables
Anderton Gables is based in the North West of the UK with offices in Liverpool, Manchester and Preston.
Please get in touch with our team.
Alternatively, give us a call on 0161 696 3119 to find out more.
More services
Project growing beyond expectations? No worries – we’ve got you covered with a full range of services to support every stage.
